Tag Archives: firmware

DO NOT upgrade XiaoMi IP camera to latest firmware

What I noticed within these few days is that XiaoMi release a latest IP camera firmware 1.8.6.1B_201603181307 to anyone who connect to XiaoMi Server to view their IP camera.

I had a close friend that bought the same camera at China, he updated to latest firmware. It works OK at the first place because he was connecting the IP camera at China (Because currently he is working at ShenZhen). But nightmare starts when he went back to Malaysia for short vacation, and the IP camera no longer working.

A uncommon voice message prompt and said “you can only use this camera within China”.

I took some risk too and update my XiaoMi IP camera to that problematic version, and hit the wall for the whole night. I was trying to rollback the firmware to older version, but it never work.

I am quite confident that I am not the only person that face this issue, there are a couple of MIUI forumer hit with the same issue too. But some of them successfully rollback the firmware version.

Advertisements

Enabling RTSP for XiaoMi IP night vision camera

Basically XiaoMi launched 2 type of IP cameras. The first one was launched 2 years ago, 720P without night vision, and the latest one was launched a year ago that has a night vision feature. Besides that, one of the major difference between these 2 versions is the RTSP protocol. The oldest one was able to be accessed by RTSP protocol, but RTSP protocol was completely disabled by XiaoMi. Which means the latest night vision IP camera cannot be used in Synology Surveillance Station or other NAS operating system.

After referring to a few online guide, I noticed that there is a possibility to implant the RTSP protocol into that latest night vision camera. What we need is a SD-card.

Overall I refer to http://xiaoyi.querex.be/ which is an unofficial web site to download Xiao Mi IP camera firmware.

2 important steps to enable RTSP protocol on XiaoMi IP camera,

  1. Flash the firmware
  2. Add in code to implant the RTSP server file

Beside enabling for RTSP protocol, we are able to enable FTP, Telnet, and HTTP web protocol in a single upgrade. I tested with quite some versions, what I noticed is that not all the version is working fine, but the one that always works is version K.

Which firmware to use?

So far I had already flashed up to 4 Xiao Mi IP camera with version K (http://xiaoyi.querex.be/1.8.5.1K_201508311131.rar). So download this firmware and then download (http://xiaoyi.querex.be/1.8.5.1K_test-rtspfix-3.rar) as well.

Extract all the .rar file, and then copy and move the “home” firmware to the root of the SD-card, and move /test/ directory to the root as well. So you should see something like below,

1

The /test/ directory should have contain below files,

2.PNG

The equip_test.sh is a C++ file responsible to do some tasks during the firmware upgrade. The “rtspsvr” and “server” is RTSP server file which is needed to enable RTSP protocol.

If you open the equip_test.sh file, you would see something like below,

Change the timezone

3.PNG

By default, the time zone would be +0 (China timezone). If you are staying at Malaysia, then you don’t need to change this value.

How to flash another firmware

  1. Disconnect cam
  2. Remove micro SD card
  3. Power on and long press reset button
  4. Disconnect cam
  5. Put “home” firmware file and “test” directory on SD card
  6. Insert micro SD card an power on
  7. Wait around 5 min and try to connect from smartphone app
  8. Check your cam it’s IP address in the router DHCP list

How to check if succeeded?

If you are able to access RTSP address using VLC, means you had just succeeded. If you planned to link it with your Synology NAS, you can follow this detailed guide here to setup your XiaoMi CCTV on Surveillance Station.